Archive for the ‘muslim’ Category

plant protein concentration production and export, asking investment from the genuine investor

September 13, 2008

Project Proposition for Plant Protein Concentration

(Draft for review, expect feed back)

 

Bangladesh is rich in plants, some of them r rich in protein & also have ability to produce plant protein concentration for both of the local and overseas feed raw material market.

 

Comparison between Meat and Bone Meal (MBM), Rice Polish (RP) and Plant Protein Concentration (PPC)

 

Description

MBM

RP

PPC

Protein %age

45-55%

12-18%

34-38%

Moisture

Below 10%

Below 10%

Below 10%

Price (int’l)

At present, US$640 or above

US$300 (+/-20%), locally

??????

Applicable for

Poultry / Fish feed only

Both of poultry / Fish / Cattle

Both of poultry / Fish / Cattle

Applied as

Increasing protein %age

Decreasing protein %age, used as filler to reduce cost and protein %age

Both of them, suitable to reduce cost and also increasing protein %age

Cost effective

Nil

Comparative

Remarkable

Cost reduction capacity

Never

Slightly

Excellent

Application

Widely, through over the world as protein supplement

Widely, through over the Asian Market as filler & reducing cost for commercial feed

Have potentiality as forth generation feed raw material and supplement

Availability in market

Have scarcity, need to wait three months or higher, after advance payment

Newly establish a competitor from the rice bran oil manufacturers, those are producing rice bran oil from the extraction of rice bran/polish, a derivative from the  auto rice mills or semi auto rice mills in the Asia Pacific region

Have potentiality to acquire market share from both of MBM and also from RP

R&D papers and Documents, in the website

Plenty

Plenty

A few, but have potentiality for the next generation feed supplements for the world feed market

Toxicity

Sometimes, harmful for the cause of Aflatoxin and or from Aspergilous and also from harmful bacterial infection, if the moisture content is higher than the 10% (Clostridium, Salmonella, etc.)

Sometimes, harmful for the cause of Aflatoxin and or from Aspergilous and also from harmful bacterial infection, if the moisture content is higher than the 10% (Clostridium, Salmonella, etc.)

Unknown. Papers yet not published about its harmfulness, as feed supplement.

 

 

Merits:

 

  1. Innovative and next generation product
  2. Low cost product for feed formulation
  3. Shelf life is higher than the MBM & RP
  4. Compact ability is lower, better & effective for layer feed
  5. Reduce cost for commercial feed for poultry, cattle and or fish feed
  6. Easy consumable from digestive system
  7. Preferable also for cattle feed supplement
  8. Available, plenty of raw material
  9. No competitive producer, will be a monopoly business
  10. For the cause of scarcity of MBM & RP, there will have no any substitute filler / protein supplement, against PPC

 

Demerits:

 

  1. Rainy season will not suitable for this product, will need additional manufacturing cost for drying
  2. To motivate customers / importers, need some time (not more than 3 months)

 

 

Probable production starting time:

 

Within Six months, after release of fund, from the potential investor

 

 

Budget Summary:

 

Sl.

Description

Unit

Amount in US$

Error / Correction

Factory Establishment:

1

Purchase of land

1

50,000

+/- 15%

2

Substructure & Superstructure

1

50,000

+/- 15%

3

Machineries

1

50,000

+/- 15%

4

Office Equipment

1

4,000

+/- 15%

5

Furniture & Fixture

1

10,000

+/- 15%

6

Vehicles (truck/lorry, pickup)

2

50,000

+/- 15%

7

Govt. permissions  from ministries of environment, industry, energy, manpower, ex-im promotion bureau, BRTA, BSCIC, etc. & also from allied secretariats

 

50,000

+/- 15%

8

Stand by generator/s

2

30,000

+/- 15%

9

Skilled and non-skilled labors salary and O/T

1 yr

240,000

+/- 15%

10

Fuel for vehicles

1 yr

20,000

 

11

Insurance

 

24,000

 

12

Raw Material & Stock

 

273,000

******

13

Advance payment for suppliers

 

 

 

Sub-Total 1

851,000

 

Head Office:

1

Yearly rent

 

12,000

 

2

Furniture & Fixture

 

 

 

3

Vehicles (reconditioned car 1, Motor Cycle 2)

3

20,000

 

4

Modern Communication Equipment, Phone, Fax, Computers with internet connection)

 

10,000

 

5

Utility bills

 

12,000

 

6

Printing & publications, incl. market promotion items

 

24,000

 

7

H/O staff remuneration

 

20,000

 

8

Hidden Cost & Risk Factors

 

30,000

 

9

Entertainment

 

6,000

 

10

Fuel /

 

15,000

 

Sub-Total 2

149,000

 

Grand Total: US$ 1,000,000

 

****** will be used as stock & turn over

 

Estimated Production/Yr.:

 

50 MT/day X 300 working days X US$ 200 = US$ 3,000,000

 

 

 

Exit Strategy:

Here hv two option for the potential investor/s

 

  1. No refund for his total investment and get 50% profit share, after each end of the year (calculated from the date of full operation).
  2. Invest will be returned to the potential investor/s, within 20 installments as a single installment is as US$50,000 and also get profit share as 50% before the 1st installment, return to investor/s account. Before the 2nd installment, investor/s will get 47.5% profit share. Before the 3rd installment, investor will receive 45% profit share, for his investment. Proportionately it will reduce the profit share as 42.5%, 40%, before the 4th and 5th installments.
  3. If the invest seeker have capability to return full investment, within one year, the potential investor will get benefit 100% profit (+/- 15%) against his investment, within one year or earlier, if the production will be higher than the expected one as 60MT or 70MT/day

 

Note: invest will be return asap, for proofing better goodwill for invest seeker. Will offer to invest with him to another lucrative bz, after full of satisfaction about invest seeker.

 

Conclusion:

 

PPC production is the new and innovative technology, will be the substitute against MBM and or RP. It will be a popular feed raw material / protein supplement for feed formulation and also reduction of cost for commercial feed, internationally.

 

It also have a potentiality to get higher profit, in context of popularity and will increase the price from expected as US$200/MT to as US$250/Mt or US$300/MT.

 

Feed ingredient RP have a competitor from rice bran oil manufacturer, increases price for the cause of scarcity in the international market, will give us plus point, to enter the shortage market of RP.

 

 

Invest seeker’s capability:

 

 

  1. Pious, honest, hard worker
  2. Trustworthy people
  3. Feed expert, was former production manager at USHA FEED LTD., with the largest feed production group of Bangladesh ( Paragon Group)
  4. Well educated (Marine Biologist)
  5. Have capability to run nine projects at a time, when he was former coordinator LGED Projects with a renowned NGO with STIDP-II of LGED
  6. Presently working as freelance coordinator with a largest bio-diesel investment company, located at USA (now as confidential), will be opened to u all, after receiving green signal from that investor.
  7. After full of satisfaction about this invest seeker, he have capability to search out another lucrative bz/s for the potential investor/s (e.g. Buffalo milk production & export, bio fertilizer production and export, biomass production and export, & too much, available at his mind)

 

Prepared by:

 

Md. Hafizul Haque

Bangladesh

Seekinvestor2007@yahoo.com

88-01710-962792

seeking investment from the genuine investor

October 29, 2007

 Dear Potential Investor/s,

pls review this project proposition. if evaluate that is an interesting, pls mail to me on seekinvestor2007@yahoo.com or call 88-01710-962792 for the next proceedings. u may join with me, with the offer as partial investor or as ur wish. ofcourse i m a trustworthy person, to any potential investor.

u may redirect this message to anybody / any potential investor, also helpful to reach in my goal.

early tks for ur review, evaluation & or redirection.

regards,

hafiz

innovative bz developer

Project Proposition for Fodder Raw Material Manufacturing (Proposed)

  • Sector/Industry: Poultry feed / Fish feed raw material manufacturing
  • Status: Startup Business
  • Incorporation Details: Md. Hafizul Haque, innovative business developer, marine biologist, hv wide experience to deal such type of business Contact No: 88-01710-962792
  • Number of Employees: 50 (proposed)
  • Amount of Funding Required: US$ 200,000
  • Percentage of Company Offered: Working Partnership, investor vs innovator 50-50 share from the profit (after return of the total investment to the potential investor/s)
  • Executive Summary: Rice polish, a neglected business, in Bangladesh, through the market research, we evaluated that it is also a silent & highly profitable business, to the feed manufacturing companies. An evaluation report stated that within a short duration (expected one yr.) return will be back from this project. I never found out the substitute business, where the return will be back, in this duration. It also needs an excellent marketing channel. If anybody hv a channel, in this sector, he shall shine, within one yr. for ur kind info., stated that the proposed person hv an strong source / marketing channel, in this sector. Once upon a time, he was a production manager of a feed mill, with a renowned group, in Bangladesh. It also noted that, without rice polish, never formulated a feed, because it is a filler to reduce price, protein, metabolic energy, etc., of a feed. To formulate / produce a poultry / fish feed, it needs from the range 15% to 35%. Products/Services: this is a supplement product, for this reason, it no need to any trade mark. Only a trade license, current bank account (for collection of cheques / payment), network, is sufficient to deal in this business .
  • Marketing Strategy: each and every moment, this business hv a vacuum, from the quality supplier. The poultry farm / hatchery, increase day by day, in Bangladesh, for the protein requirements. The leading businessmen’s of this sector r illiterate. A very few peoples knows about the marketing strategy, maintain of channel, in this sector. This is the proposed persons plus point. He has wide knowledge about the availability of R/M, production techniques, proper formulation, business strategy, etc. because at present, he also acting as a director (technical), with a reputed rice polish manufacturing farm.
  • Projected Revenues: investor may receive investment return, at a time, after successful operation of one yr., from the starting date of full supply. If the investor hv no need to return back after one yr., it will be multiply for the expansion of this project.
  • Cost Benefit Analysis: a short description about Rice polish manufacturing project.
    1. land development / rent +/- US$ 25,000
    2. structural development substructure) +/- US$ 25,000
    3. Machine installation & development +/- US$ 30,000
    4. operational & maintenance cost & others +/- US$ 40,000
    5. security money to the feed manufacturer +/- US$ 15,000
    6. stock & advance payment to the primary producer +/- US$ 50,000
    7. family exp for 1 yr +/- US$ 15,000 (it will be return from the profit share, after 1 yr.)
      __________________________________________
      Total Minimum expenditure is +/- US$ 200,000
      from the date of full operation (full setup the production floor, with skilled manpower, output of finished product) of this project, sell per day 4 nos. of truck X us$ 1,715/truck X 320 days/yr. = US$ 2,195,200 (turnover).

note: US$ 1.00 = BD Taka 70.00 but just now is 71.90 (present)

if i receive profit 1.00 bd taka per kg is equivalent of us$ 0.0142857/kg X 12000kg/truck X 4 nos of truck per day X 320 working days = profit will be back us$ 219,428.35

Note: calculated with 70.00)

Management Team:

Project/factory Manager(1)

Supervisor (2) for day/night

day labors (40-45 persons)

Marketing Executive cum Accountant

and the proposed person as owner/MD/CEO.

Exit Strategy: Said as previous & or expansion of this project, as per investors choice. If investor interested to return back his investment, with its profit, may need advance notice before three months. I m confident that the investor, never feel interest to return back his investment, because, no any business, I ever evaluated that gives a 100% profit, after successful completion of one yr.

holidays: after transfer of the total amount to the project account, within three months, it will be run into the full operation.

Several Innovative themes from the invest seeker r available in this link

http://www.expatriates.com/cls/1956503.html